Click here

WIRELESS DOOR LOCK BUZZER INSPECTION

Click here
Click here Click here
  1. Click here

    INSPECT WIRELESS DOOR LOCK BUZZER


    1. A01IPR2E01

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always 950 to 1050 Ω
      Table 1. Text in Illustration
      *1

      Component without harness connected

      (Wireless Door Lock Buzzer)
      Tip:

      The buzzer activation circuit is built into the ECU, not into the buzzer itself. Even if battery voltage is applied directly to the buzzer, the buzzer will not sound.

      If the result is not as specified, replace the wireless door lock buzzer.