DOOR CONTROL RECEIVER INSTALLATION

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL DOOR CONTROL RECEIVER


    1. A01IOGLE01

      Install the receiver with the bolt.

    2. Connect the connector.

  2. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH


    1. Attach the 6 clips and 7 claws to install the deck trim side panel.

    2. Install the 2 bolts.

      A01ISDV
    3. A01IQEC

      w/ Rear No. 1 Seat:

      Install the rear No. 1 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    4. A01IPQ5

      w/ Rear No. 2 Seat:

      Install the rear No. 2 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  4. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

    A01IUD8

    Tech Tips

    Use the same procedure for all the luggage hold belt strikers.


    1. Install the luggage hold belt striker with the bolt.

  5. INSTALL DECK TRIM SIDE SERVICE HOLE COVER

    A01IQ10

    Tech Tips

    Use the same procedure to install the deck trim side service hole cover on the other side.


    1. Attach the 4 claws and 2 guides to install the deck trim side service hole cover.

  6. INSTALL FRONT DECK SIDE TRIM COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure described for the LH side.

  8. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. INSTALL REAR DOOR SCUFF PANEL RH

    Tech Tips

    Use the same procedure described for the LH side.

  10. INSTALL REAR DECK TRIM COVER

    A01ITUG

    1. Attach the 6 claws and 4 guides to install the rear deck trim cover.

  11. INSTALL REAR DECK FLOOR BOX (w/o Rear No. 2 Seat)


    1. Install the rear deck floor box.

      A01IO7TE01

  12. INSTALL REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)


    1. Place the rear No. 2 seat assembly in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. Temporarily install the 2 bolts.

      A01IUCV

    3. Pull the 2 straps and raise the 2 seatbacks.

    4. Temporarily install the 5 bolts.

      A01IRCI

    5. Tighten the bolts in the order shown in the illustration.

      A01IST0E01
      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    6. Connect the connector under the seat.

  13. INSTALL REAR NO. 2 SEAT TRACK COVER (w/ Rear No. 2 Seat)


    1. A01IOQC

      Attach the 2 guides and claw.

    2. Attach the 2 claws to install the cover.

  14. INSTALL REAR NO. 2 SEAT TRACK BRACKET COVER (w/ Rear No. 2 Seat)

    Tech Tips

    Use the same procedure to install the cover on the other side.


    1. A01IQ45

      Attach the 2 claws to install the cover.

  15. INSTALL DECK TRIM SIDE BELT HOLE COVER LH (w/ Rear No. 2 Seat)

    A01IRMT

    1. Slide the deck trim side belt hole cover in the direction indicated by the arrow in the illustration and attach the 2 claws and 6 guides to install it.

  16. INSTALL DECK TRIM SIDE BELT HOLE COVER RH (w/ Rear No. 2 Seat)

    Tech Tips

    Use the same procedure described for the LH side.

  17. INSTALL DECK FLOOR BOX LH

    A01IU1X

    1. w/o Rear No. 2 Seat:


      1. Attach the 4 claws to install the deck floor box.

    2. A01IN2Q

      w/ Rear No. 2 Seat:


      1. Attach the 3 claws and guide to install the deck floor box.

      2. Install the bolt.

  18. INSTALL DECK FLOOR BOX RH

    A01ISZR

    1. w/o Rear No. 2 Seat:


      1. Attach the 2 claws and guide to install the deck floor box.

    2. A01IPFF

      w/ Rear No. 2 Seat:


      1. Attach the 2 claws and guide to install the deck floor box.

      2. Install the bolt.

  19. INSTALL LOWER DECK TRIM SIDE BOARD LH (w/o Rear No. 2 Seat)

    A01IN88

    1. Attach the claw and 2 guides to install the lower deck trim side board.

  20. INSTALL LOWER DECK TRIM SIDE BOARD RH (w/o Rear No. 2 Seat)

    Tech Tips

    Use the same procedure described for the LH side.

  21. INSTALL DECK RAIL COVER (w/ Rear No. 2 Seat, w/o Spare Tire)

    A01IP10

    1. Attach the 2 claws and 2 guides to install the deck rail cover.

    2. Install the clip.

  22. INSTALL LUGGAGE COMPARTMENT TRAY (w/ Rear No. 2 Seat, w/ Spare Tire)

    A01ISB5

    1. Install the luggage compartment tray.

  23. INSTALL FRONT DECK FLOOR BOX (w/o Rear No. 2 Seat)

    A01INUT

    1. Install the front deck floor box with the 3 bolts.

  24. INSTALL DECK BOARD ASSEMBLY (w/ Rear No. 2 Seat)

    A01IRW6

    1. Attach the 4 claws and 6 clips to install the deck board.

  25. INSTALL NO. 2 DECK BOARD (w/o Rear No. 2 Seat)

    A01IUJ6

    1. Attach the 5 clips to install the No. 2 deck board.

  26. INSTALL NO. 1 DECK BOARD (w/o Rear No. 2 Seat)

    A01IO5W

    1. Install the No. 1 deck board.

  27. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    A01IUDC

    1. Install the tonneau cover.