DOOR CONTROL RECEIVER REMOVAL


  1. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    A01IUDC

    1. Remove the tonneau cover.

  2. REMOVE NO. 1 DECK BOARD (w/o Rear No. 2 Seat)

    A01IO5W

    1. Remove the No. 1 deck board.

  3. REMOVE NO. 2 DECK BOARD (w/o Rear No. 2 Seat)

    A01IUJ6

    1. Detach the 5 clips and remove the No. 2 deck board.

  4. REMOVE DECK BOARD ASSEMBLY (w/ Rear No. 2 Seat)

    A01IRW6

    1. Detach the 4 claws and 6 clips, and remove the deck board.

  5. REMOVE FRONT DECK FLOOR BOX (w/o Rear No. 2 Seat)

    A01INUT

    1. Remove the 3 bolts and front deck floor box.

  6. REMOVE LUGGAGE COMPARTMENT TRAY (w/ Rear No. 2 Seat, w/ Spare Tire)

    A01ISB5

    1. Remove the luggage compartment tray.

  7. REMOVE DECK RAIL COVER (w/ Rear No. 2 Seat, w/o Spare Tire)

    A01IP10

    1. Remove the clip.

    2. Detach the 2 claws and 2 guides, and remove the deck rail cover.

  8. REMOVE LOWER DECK TRIM SIDE BOARD LH (w/o Rear No. 2 Seat)

    A01IN88

    1. Detach the claw and 2 guides, and remove the lower deck trim side board.

  9. REMOVE LOWER DECK TRIM SIDE BOARD RH (w/o Rear No. 2 Seat)

    Tech Tips

    Use the same procedure described for the LH side.

  10. REMOVE DECK FLOOR BOX LH

    A01IU1X

    1. w/o Rear No. 2 Seat:


      1. Detach the 4 claws and remove the deck floor box.

    2. A01IN2Q

      w/ Rear No. 2 Seat:


      1. Remove the bolt.

      2. Detach the 3 claws and guide, and remove the deck floor box.

  11. REMOVE DECK FLOOR BOX RH

    A01ISZR

    1. w/o Rear No. 2 Seat:


      1. Detach the 2 claws and guide, and remove the deck floor box.

    2. A01IPFF

      w/ Rear No. 2 Seat:


      1. Remove the bolt.

      2. Detach the 2 claws and guide, and remove the deck floor box.

  12. REMOVE DECK TRIM SIDE BELT HOLE COVER LH (w/ Rear No. 2 Seat)

    A01IUQX

    1. Detach the 2 claws and 6 guides, and remove the deck trim side belt hole cover in the direction indicated by the arrow in the illustration.

  13. REMOVE DECK TRIM SIDE BELT HOLE COVER RH (w/ Rear No. 2 Seat)

    Tech Tips

    Use the same procedure described for the LH side.

  14. REMOVE REAR NO. 2 SEAT TRACK BRACKET COVER (w/ Rear No. 2 Seat)

    Tech Tips

    Use the same procedure to remove the cover on the other side.


    1. A01IS71

      Detach the 2 claws and remove the cover.

  15. REMOVE REAR NO. 2 SEAT TRACK COVER (w/ Rear No. 2 Seat)


    1. A01IPIR

      Detach the 3 claws and 2 guides, and then remove the cover.

  16. REMOVE REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)


    1. Disconnect the connector under the seat.

    2. Remove the 5 bolts.

      A01IRCI

    3. Pull the 2 straps and fold down the 2 seatbacks.

      A01ITYW

    4. Remove the 2 bolts.

    5. Remove the rear No. 2 seat assembly from the vehicle.

      Note

      Be careful not to damage the vehicle body.

  17. REMOVE REAR DECK FLOOR BOX (w/o Rear No. 2 Seat)


    1. Remove the rear deck floor box.

      A01IO7TE01

  18. REMOVE REAR DECK TRIM COVER

    A01ITUG

    1. Detach the 6 claws and 4 guides, and remove the rear deck trim cover.

  19. REMOVE REAR DOOR SCUFF PANEL RH

    Tech Tips

    Use the same procedure described for the LH side.

  20. REMOVE REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  21. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure described for the LH side.

  22. REMOVE FRONT DECK SIDE TRIM COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  23. REMOVE DECK TRIM SIDE SERVICE HOLE COVER

    A01IUGKE01
    Text in Illustration
    *1 Protective Tape

    Tech Tips

    Use the same procedure to remove the deck trim side service hole cover on the other side.


    1. Using a screwdriver, detach the 4 claws and 2 guides, and remove the deck trim side service hole cover.

      Tech Tips

      Tape the screwdriver tip before use.

  24. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

    A01IUD8

    Tech Tips

    Use the same procedure for all the luggage hold belt strikers.


    1. Remove the bolt and luggage hold belt striker.

  25. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

    A01IQEC

    1. w/ Rear No. 1 Seat:

      Remove the bolt and rear No. 1 seat belt anchor.

    2. A01IPQ5

      w/ Rear No. 2 Seat:

      Remove the bolt and rear No. 2 seat belt anchor.

    3. Remove the 2 bolts.

    4. Detach the 6 clips and 7 claws, and remove the deck trim side panel.

      A01ISDV

  26. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  27. REMOVE DOOR CONTROL RECEIVER


    1. A01IOGLE01

      Disconnect the connector.

    2. Remove the bolt and receiver.