WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Entry and Start System) CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Utility / Customize.

    5. Select the setting by referring to the table below.

      Wireless Door Lock
      Display Default Contents Setting
      Hazard Answer Back ON When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights and side turn signal lights once. When the unlock switch is pressed, the hazard warning lights and side turn signal lights illuminate twice. ON/OFF
      Wireless Control ON Function that turns the wireless door lock function on or off. ON/OFF
      Auto Lock Time 30 s Function that changes the time until relocking after unlocking the doors with the wireless door lock function. 30 s/60 s/120 s