POWER DOOR LOCK CONTROL SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / (desired system) / Data List.

    5. According to the display on the intelligent tester, read the Data List.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      D Door Courtesy SW

      Front door courtesy light switch LH signal*1 / ON or OFF

      Front door courtesy light switch RH signal*2 / ON or OFF

      ON: Driver side door open

      OFF: Driver side door closed

      		 -
      D-Door Lock Pos SW

      Front door lock LH (door lock position switch) signal*1 / ON or OFF

      Front door lock RH (door lock position switch) signal*2 / ON or OFF

      ON: Driver side door unlocked

      OFF: Driver side door locked

      		 -
      Door Key SW-Lock Door key-linked switch lock signal / ON or OFF

      ON: Front door lock key cylinder turned to lock position

      OFF: Front door lock key cylinder not turned

      		 -
      Door Key SW-Unlock Door key-linked switch unlock signal / ON or OFF

      ON: Front door lock key cylinder turned to unlock position

      OFF: Front door lock key cylinder not turned

      		 -
      P Door Courtesy SW

      Front door courtesy light switch RH signal*1 / ON or OFF

      Front door courtesy light switch LH signal*2 / ON or OFF

      ON: Front passenger side door open

      OFF: Front passenger side door closed

      		 -
      P-Door Lock Pos SW

      Front door lock RH (door lock position switch) signal*1 / ON or OFF

      Front door lock LH (door lock position switch) signal*2 / ON or OFF

      ON: Front passenger side door unlocked

      OFF: Front passenger side door locked

      		 -
      RL Door Courtesy SW Rear side door courtesy light switch LH signal / ON or OFF

      ON: Rear LH side door open

      OFF: Rear LH side door closed

      		 -
      RL-Door Lock Pos SW Rear door lock LH (door lock position switch) signal / ON or OFF

      ON: Rear LH side door unlocked

      OFF: Rear LH side door locked

      		 -
      RR Door Courtesy SW Rear door courtesy light switch RH signal / ON or OFF

      ON: Rear RH side door open

      OFF: Rear RH side door closed

      		 -
      RR-Door Lock Pos SW Rear door lock RH (door lock position switch) signal / ON or OFF

      ON: Rear RH side door unlocked

      OFF: Rear RH side door locked

      		 -
      Back Door Courtesy SW Back door courtesy light switch signal / ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 -
      Back Door Open Handle SW*3 Back door opener switch signal / ON or OFF

      ON: Back door opener switch pushed

      OFF: Back door opener switch not pushed

      		 -
      Back Door Open Back door lock position status / Permit or Prohibit

      Permit: Back door unlocked

      Prohibit: Back door locked

      		 -
      IG SW Ignition switch status / ON or OFF

      ON: Ignition switch ON

      OFF: Ignition switch off

      		 -
      ACC SW Ignition switch status / ON or OFF

      ON: Ignition switch ACC

      OFF: Ignition switch off

      		 -

      • *1: for LHD

      • *2: for RHD

      • *3: w/o Entry and Start System

  2. ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Active Test.

    5. According to the display on the intelligent tester, perform the Active Test.

      Main Body
      Tester Display Test Part Control Range Diagnostic Note
      Door Lock Operate door lock motor Lock/Unlock -
      Shock Detection Unlock Operate door lock motor Lock/Unlock -
      Trunk and Back-Door Open Operate back door opener ON/OFF -