POWER DOOR LOCK CONTROL SYSTEM OPERATION CHECK


  1. CHECK POWER DOOR LOCK OPERATION


    1. Check the basic function.


      1. Check that all doors lock when the door control switch (for manual operation) is turned to lock and all doors unlock when turned to unlock.

      2. Check that all doors lock when the front door lock key cylinder is turned to lock using the key.

      3. Check that all doors unlock when the front door lock key cylinder is turned from lock to unlock using the key.

    2. Check the key lock-in prevention function.

      Note

      In order to prevent the key from being locked in, the inspection should be made with the driver side door window open.


      1. w/ Entry and Start System:

        Turn the ignition switch to ON or ACC.

        w/o Entry and Start System:

        Insert the key into the ignition key cylinder.

      2. With the driver side door open, check that all doors unlock immediately after the door lock knob for the driver side door is locked.

      3. With the driver side door open, check that all doors unlock immediately after the door control switch (for manual operation) is turned to lock.

      4. With the driver side door open, lock the front door lock LH*1 or RH*2 knob and hold it for 2 seconds or more, and then close the driver side door and check that all doors unlock.


        • *1: for LHD

        • *2: for RHD

    3. Check the security function.


      1. Close all doors with the driver side door window open so that the door control switch can be operated from outside the vehicle.

      2. Remove the key from the inside of the vehicle, open the driver side door and then close and lock the door without using the key. Then, check that no doors unlock when the door control switch (for manual operation) is turned to unlock from outside the vehicle.

      3. Remove the key from the inside of the vehicle, open the driver side door and then close and lock the driver side door with the key. Under this condition, check that no doors unlock when the door control switch (for manual operation) is turned to unlock from outside the vehicle.

      4. Remove the key from the inside of the vehicle, open and close the driver side door and lock the door with the wireless door lock operation. Then, check that no doors unlock when the door control switch (for manual operation) is turned to unlock from outside the vehicle.

        Tech Tips

        Check that the security function is canceled under the following conditions:


        • The ignition switch is turned to ON.

        • The driver side door is unlocked using the key.

        • The door control switch (for manual operation) is turned to unlock after the door lock knob is unlocked manually.

        • The doors are unlocked by wireless operation (or entry and start operation).

    4. Check the illumination function.


      1. Set the map light switch to the DOOR position.

      2. With all the doors locked, check that all the doors unlock and the map light turns on when the front door lock key cylinder is turned to unlock using the key.

      3. Check that the map light turns off in approximately 15 seconds when the doors are not opened.

  2. CHECK BACK DOOR UNLATCH OPERATION


    1. Unlock the door locks using the door control switch (manual operation).

    2. Push the back door open switch on the back door outside handle.

    3. Check that the back door unlatches.

  3. CHECK DOUBLE LOCKING FUNCTION (w/ Double Locking System)

    CAUTION:

    Do not activate the double locking function when there are people in the vehicle because the doors cannot be opened from the inside of the vehicle.

    Under emergency conditions, such as if the power has been cut, this function can be canceled by inserting the key (mechanical key) into the driver door key cylinder and turning it to unlock.


    1. Check that the double locking function is set.


      1. Open all the windows.

      2. Turn the ignition switch off.

      3. Open and close the driver side door, and make sure that all doors, including the back door, are closed securely.

      4. Press the transmitter lock switch twice within 5 seconds, and check that the hazard warning lights flash once at this time to indicate that the double locking function has been set.

        Tech Tips

        w/ Entry and Start System

        The double locking function can be turned on by touching the lock switch on the outside handle 2 times within 3 seconds.

      5. Try to unlock each door using the inside handle, and check that none of the doors unlock.

        Note

        The double locking function does not affect the back door.

    2. Check that the double locking function is canceled.


      1. Press the transmitter unlock switch while the double locking function is set, and check that the hazard warning lights flash twice at this time to indicate that the function is canceled.

      2. Check that the doors can be opened by using both the inside and outside handles.

        Note

        If the battery of the transmitter is depleted, only the driver side door can be opened using the key. However, the theft deterrent system still remains on. The theft alarm sounds when the door is opened without using the transmitter.