Click here

POWER MANAGEMENT CONTROL ECU (for RHD) REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY


    1. Remove the instrument panel safety pad (Click here).

  2. Click here

    REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY


    1. Push in the sides of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.

    2. Detach the glove compartment door stopper from the glove compartment door as shown in the illustration.

    3. A01IP3S

      Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.

  3. Click here

    REMOVE FRONT DOOR SCUFF PLATE LH


    1. Detach the 8 claws and 2 clips, and remove the front door scuff plate.

  4. Click here

    REMOVE COWL SIDE TRIM BOARD LH


    1. Detach the 2 clips and guide, and remove the cowl side trim board.

  5. Click here

    REMOVE CONNECTOR HOLDER


    1. A01IPYZ

      Detach the 2 clamps.

    2. Remove the bolt and connector holder.

  6. Click here

    REMOVE POWER MANAGEMENT CONTROL ECU


    1. Disconnect the 2 connectors.

    2. Remove the 2 bolts and power management control ECU.