POWER MANAGEMENT CONTROL ECU (for LHD) INSTALLATION


  1. INSTALL POWER MANAGEMENT CONTROL ECU

    A01INHPE01

    1. w/o Entry and Start System:

      Install the power management control ECU with the bolt.

      Torque:
      9.5 N*m  { 97 kgf*cm, 84 in.*lbf }

    2. w/ Entry and Start System:

      Align the power management control ECU positioning hole with the claw, and install the power management control ECU with the 2 bolts.

      Torque:
      9.5 N*m  { 97 kgf*cm, 84 in.*lbf }

      Tech Tips

      First install the lower bolt, and then install the upper bolt.

    3. Connect the 2 connectors.

  2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    A01IRG9

    1. Attach the 2 hinges to install the glove compartment door.

    2. A01ISP7E01

      Attach the glove compartment door stopper to the glove compartment door as shown in the illustration.

    3. While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the glove compartment door to engage the 2 stoppers.

      Text in Illustration
      *1 Stopper