POWER MANAGEMENT CONTROL ECU (for LHD) REMOVAL


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE POWER MANAGEMENT CONTROL ECU (for Type A)


    1. Remove the glove compartment door sub-assembly Click here.

    2. Remove the glove compartment door assembly Click here.

    3. A01IPA1

      Disconnect each connector.

    4. Remove the screw and power management control ECU.

  4. REMOVE POWER MANAGEMENT CONTROL ECU (for Type B, for Type C, for Type D)


    1. Remove the instrument panel safety pad sub-assembly Click here.

    2. Remove the lower instrument panel sub-assembly Click here.

    3. A01IROPE01
      Text in Illustration
      *a Screw
      *b Bolt

      Disconnect each connector.

    4. Remove the 2 screws, bolt and ECU integration box RH.

    5. Detach the 2 claws and remove the power management control ECU from the ECU integration box RH.

      A01IRYVE01
      Text in Illustration
      *A for Type B *B for Type C
      *C for Type D - -