Click here

ULTRASONIC SENSOR (for Front) REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE RADIATOR SUPPORT OPENING COVER


    1. A01IQMS

      Remove the 3 clips.

    2. Detach the 4 hooks and remove the radiator support opening cover.

  2. Click here

    REMOVE RADIATOR GRILLE PROTECTOR


    1. Remove the 2 radiator grille protectors.

  3. Click here

    REMOVE FRONT BUMPER COVER


    1. Using a screwdriver, remove the pin hold clip.

      Tip:

      Use the same procedure for the RH and LH sides.

    2. Remove the screw.

      Tip:

      Use the same procedure for the RH and LH sides.

    3. Put protective tape around the front bumper cover.

    4. A01IQQPE01

      Remove the bolt and 2 clips.

      Table 1. Text in Illustration
      *1 Protective Tape - -

    5. Remove the front bumper cover.


      1. Detach the 6 claws.

      2. w/ Headlight Cleaner System:

        Disconnect the headlight cleaner hose and then drain the washer fluid.

        Tip:

        Use a container to collect the washer fluid.

      3. Disconnect the 2 fog light connectors.

      4. w/ TOYOTA Parking Assist-sensor System:

        Disconnect the No. 4 engine room wire connector.

      5. A01ITLFE01

        Remove the front bumper cover.

        Table 2. Text in Illustration
        *1 Protective Tape - -
  4. Click here

    REMOVE NO. 4 ENGINE ROOM WIRE


    1. Disconnect the 4 connectors.

    2. A01IOTY

      Detach the 6 clamps and remove the No. 4 engine room wire.

  5. Click here

    REMOVE NO. 1 ULTRASONIC SENSOR

    Tip:

    Use the same procedure for all ultrasonic sensors.


    1. A01IRZT

      Detach the 2 claws and remove the ultrasonic sensor.

  6. Click here

    REMOVE NO. 1 ULTRASONIC SENSOR RETAINER

    Tip:

    Use the same procedure for all No. 1 ultrasonic sensor retainers.


    1. Detach the 4 claws and remove the No. 1 ultrasonic sensor retainer.