CLEARANCE WARNING INDICATOR INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL TELLTALE LIGHT ASSEMBLY


    1. A01ISNPE01

      Attach the 2 claws to install the telltale light (clearance warning indicator).

  2. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Air Conditioning System)


    1. A01IS8V

      Attach the 2 claws to connect the air mix damper control cable sub-assembly.

    2. A01IQKC

      Attach the 2 claws to connect the No. 2 heater control cable sub-assembly.

    3. Connect each connector.

    4. A01IN5R

      Attach the 4 clips to install the center instrument cluster finish panel assembly.

  3. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL


    1. except Manual Transaxle:

      Install the lower center instrument panel finish panel Click here.

    2. for Manual Transaxle:

      Install the lower center instrument panel finish panel Click here.

  4. INSTALL POSITION INDICATOR HOUSING ASSEMBLY (except Manual Transaxle)

    A01IROS

    1. Connect the connector.

    2. Attach the 5 claws and 3 clips to install the position indicator housing.

  5. INSTALL SHIFTING HOLE COVER (for Manual Transaxle)

    A01INHVE01
    Text in Illustration
    *1 T Washer

    1. Attach the 5 claws and 3 clips to install the shifting hole cover.

    2. Install the knob spring.

    3. Install the T washer and twist it in the direction indicated by the arrow.

  6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. Install the shift lever knob and twist it in the direction indicated by the arrow.

      A01IQX6E01

  7. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    A01IRVW

    1. for Automatic Air Conditioning System:

      Attach the 3 clips, claw and 2 guides to install the instrument panel finish panel end.

    2. A01ISYI

      for Manual Air Conditioning System:

      Attach the 3 clips, claw and guide to install the instrument panel finish panel end.

  8. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    A01IS29

    1. for Automatic Air Conditioning System:

      Attach the 3 clips and 2 guides to install the instrument panel finish panel end.

    2. A01INF5

      for Manual Air Conditioning System:

      Attach the 3 clips and guide to install the instrument panel finish panel end.