Click here

CLEARANCE WARNING INDICATOR REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE INSTRUMENT PANEL FINISH PANEL END LH


    1. for Automatic Air Conditioning System:


      1. A01IQDGE01

        Put protective tape around the instrument panel finish panel end LH.

        Table 1. Text in Illustration
        *1 Protective Tape

      2. Using a moulding remover A, detach the 3 clips and 2 guides, and remove the instrument panel finish panel end LH.

    2. for Manual Air Conditioning System:


      1. A01ITLUE01

        Put protective tape around the instrument panel finish panel end LH.

        Table 2. Text in Illustration
        *1 Protective Tape

      2. Using a moulding remover A, detach the 3 clips and guide, and remove the instrument panel finish panel end LH.

  2. Click here

    REMOVE INSTRUMENT PANEL FINISH PANEL END RH


    1. for Automatic Air Conditioning System:


      1. Put protective tape around the instrument panel finish panel end RH.

        Table 3. Text in Illustration
        *1 Protective Tape

      2. Using a moulding remover A, detach the 3 clips, claw and 2 guides, and remove the instrument panel finish panel end RH.

    2. A01IQX3E01

      for Manual Air Conditioning System:


      1. Put protective tape around the instrument panel finish panel end RH.

        Table 4. Text in Illustration
        *1 Protective Tape

      2. Using a moulding remover A, detach the 3 clips, claw and guide, and remove the instrument panel finish panel end.

  3. Click here

    REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01ISYGE01

      Twist the shift lever knob in the direction indicated by the arrow and remove it.

  4. Click here

    REMOVE POSITION INDICATOR HOUSING ASSEMBLY (except Manual Transaxle)


    1. Detach the 5 claws and 3 clips.

    2. Disconnect the connector and remove the position indicator housing.

  5. Click here

    REMOVE SHIFTING HOLE COVER (for Manual Transaxle)


    1. Twist the T washer in the direction indicated by the arrow and remove it.

      Table 5. Text in Illustration
      *1 T Washer

    2. Remove the knob spring.

    3. Detach the 5 claws and 3 clips, and remove the shifting hole cover.

  6. Click here

    REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL


    1. except Manual Transaxle:

      (Click here)

    2. for Manual Transaxle:

      (Click here)

  7. Click here

    REMOVE TELLTALE LIGHT ASSEMBLY


    1. A01IODY

      Detach the 2 claws and remove the telltale light assembly (clearance warning indicator).