REAR VIEW MONITOR SYSTEM (for Inner Rear View Mirror Type) HOW TO PROCEED WITH TROUBLESHOOTING

Tech Tips

Use these procedures to troubleshoot the rear view monitor system.


  1. VEHICLE BROUGHT TO WORKSHOP


    NEXT

  2. INSPECT BATTERY VOLTAGE

    Standard voltage
    11 to 14 V

    If the voltage is below 11 V, replace or recharge the battery before proceeding.


    NEXT

  3. CUSTOMER PROBLEM ANALYSIS


    NEXT

  4. PROBLEM SYMPTOM CONFIRMATION


    NEXT

  5. PROBLEM SYMPTOMS TABLE


    1. Refer to Problem Symptoms Table Click here.

      Result
      Result Proceed to
      Fault is not listed in Problem Symptoms Table A
      Fault is listed in Problem Symptoms Table B

      B

      Go to step 7
      A

  6. OVERALL ANALYSIS AND TROUBLESHOOTING


    1. Terminals of ECU Click here.


      NEXT

  7. ADJUST, REPAIR OR REPLACE


    NEXT

  8. CONFIRMATION TEST


    NEXT
    END