Click here

REAR VIEW MONITOR SYSTEM (for Radio and Display Type) HOW TO PROCEED WITH TROUBLESHOOTING

Click here
Click here Click here
Tip:

Use these procedures to troubleshoot the rear view monitor system.


  1. Click here

    VEHICLE BROUGHT TO WORKSHOP


    • NEXT
  2. Click here

    INSPECT BATTERY VOLTAGE

    Standard voltage
    11 to 14 V

    If the voltage is below 11 V, replace or recharge the battery before proceeding.


    • NEXT
  3. Click here

    CUSTOMER PROBLEM ANALYSIS


    • NEXT
  4. Click here

    PROBLEM SYMPTOM CONFIRMATION


    • NEXT
  5. Click here

    PROBLEM SYMPTOMS TABLE


    1. Refer to Problem Symptoms Table (Click here).

      Table 1. Result
      Result Proceed to
      Fault is not listed in Problem Symptoms Table A
      Fault is listed in Problem Symptoms Table B

      • B
      • Go to step 7
      • A
  6. Click here

    OVERALL ANALYSIS AND TROUBLESHOOTING


    1. Terminals of ECU (Click here).


      • NEXT
  7. Click here

    ADJUST, REPAIR OR REPLACE


    • NEXT
  8. Click here

    CONFIRMATION TEST


    • NEXT
    • END