Click here

CLEARANCE WARNING ECU INSTALLATION

Click here
Click here Click here
Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

Click here
  1. Click here

    INSTALL CLEARANCE WARNING ECU ASSEMBLY


    1. Connect the connector.

    2. Install the clearance warning ECU with the bolt.

  2. Click here

    INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)


    1. Connect the connector.

    2. Attach the 4 clips to install the air conditioning control.

  3. Click here

    INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Air Conditioning System)


    1. A01IS8V

      Attach the 2 claws to connect the air mix damper control cable sub-assembly.

    2. A01IQKC

      Attach the 2 claws to connect the No. 2 heater control cable sub-assembly.

    3. Connect each connector.

    4. A01IN5R

      Attach the 4 clips to install the center instrument cluster finish panel assembly.

  4. Click here

    INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL


    1. except Manual Transaxle:

      (Click here)

    2. fort Manual Transaxle:

      (Click here)

  5. Click here

    INSTALL POSITION INDICATOR HOUSING ASSEMBLY (except Manual Transaxle)


    1. Connect the connector.

    2. Attach the 5 claws and 3 clips to install the position indicator housing.

  6. Click here

    INSTALL SHIFTING HOLE COVER (for Manual Transaxle)


    1. Attach the 5 claws and 3 clips to install the shifting hole cover.

    2. Install the knob spring.

    3. Install the T washer and twist it in the direction indicated by the arrow.

      Table 1. Text in Illustration
      *1 T Washer
  7. Click here

    INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01IQX6E01

      Install the shift lever knob and twist it in the direction indicated by the arrow.

  8. Click here

    INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (w/ Audio, for Radio Receiver Type)


    1. Connect the connectors.

    2. A01ITIX

      Insert the radio and display receiver assembly with bracket to attach the 4 clips on its backside.

      Note:

      When inserting the radio and display receiver, do not press the knobs on it.

    3. Install the radio and display receiver assembly with bracket with the 4 screws.

      4.0 N*m 40 kgf*cm 35 in.*lbf
  9. Click here

    INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Audio, for Radio Receiver Type)


    1. Connect the connectors.

    2. A01IN8Y

      Insert the radio receiver assembly with bracket to attach the 4 clips on its backside.

      Note:

      When inserting the radio receiver, do not press the knobs on it.

    3. Install the radio receiver assembly with bracket with the 4 screws.

      4.0 N*m 40 kgf*cm 35 in.*lbf
  10. Click here

    INSTALL STEREO OPENING COVER WITH BRACKET (w/o Audio)


    1. Install the stereo opening cover with the 4 bolts.

  11. Click here

    INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Audio)


    1. Attach the 4 clips, 3 claws and 3 guides to install the center instrument cluster finish panel.

  12. Click here

    INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. Connect the connector.

    2. Attach the 8 claws and 4 guides to install the center instrument panel register.

  13. Click here

    INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. A01IPRP

      for Automatic Air Conditioning System:

      Attach the 3 clips and 2 guides to install the instrument panel finish panel end LH.

    2. A01IOHW

      for Manual Air Conditioning System:

      Attach the 3 clips and guide to install the instrument panel finish panel end LH.

  14. Click here

    INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Tip:

    Use the same procedure described for the LH side.