NAVIGATION ECU INSTALLATION


  1. INSTALL NAVIGATION ECU


    1. Connect the antenna cord connector and attach the clamp.

    2. A01IU0Q

      Align the positioning boss of the navigation ECU with the hole in the radio and display receiver assembly, and then place the extension module on the radio and display receiver assembly.

    3. Connect the antenna cord connector.

    4. Connect the 5 connectors and install the navigation wire.

  2. INSTALL NO. 2 RADIO BRACKET


    1. Install the No. 2 radio bracket with the 4 bolts.

      Torque:
      4.0 N*m  { 40 kgf*cm, 35 in.*lbf }

  3. INSTALL NO. 1 RADIO BRACKET


    1. Install the No. 1 radio bracket with the 4 bolts.

      Torque:
      4.0 N*m  { 40 kgf*cm, 35 in.*lbf }

  4. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY

    Click here