NAVIGATION ECU INSTALLATION


  1. INSTALL EXTENSION MODULE


    1. Connect the antenna cord connector and attach the clamp.

    2. A01IU0Q

      Align the positioning boss of the extension module with the hole in the radio and display receiver assembly, and then place the extension module on the radio and display receiver assembly.

    3. Connect the antenna cord connector.

    4. Connect the 5 connectors and install the navigation wire.

  2. INSTALL NO. 2 RADIO RECEIVER BRACKET


    1. Install the No. 2 radio receiver bracket with the 4 bolts.

      Torque:
      4.0 N*m  { 40 kgf*cm, 35 in.*lbf }

  3. INSTALL NO. 1 RADIO RECEIVER BRACKET


    1. Install the No. 1 radio receiver bracket with the 4 bolts.

      Torque:
      4.0 N*m  { 40 kgf*cm, 35 in.*lbf }

  4. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY

    Click here