Click here

RADIO ANTENNA CORD INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL ANTENNA CORD SUB-ASSEMBLY (for LHD)


    1. w/o Digital Audio Broadcasting:


      1. Attach the 7 clamps.

      2. Connect the connector.

      3. A01INM6

        Install the antenna cord with the bolt.

        8.4 N*m 85 kgf*cm 73 in.*lbf

    2. w/ Digital Audio Broadcasting:


      1. Attach the 7 clamps.

      2. Connect the connector.

      3. A01IR4D

        Install the antenna cord with the bolt.

        8.4 N*m 85 kgf*cm 73 in.*lbf
  2. Click here

    INSTALL ANTENNA CORD SUB-ASSEMBLY (for RHD)


    1. w/o Digital Audio Broadcasting:


      1. Attach the 7 clamps.

      2. Connect the connector.

      3. A01IQIS

        Install the antenna cord with the bolt.

        8.4 N*m 85 kgf*cm 73 in.*lbf

    2. w/ Digital Audio Broadcasting:


      1. Attach the 7 clamps.

      2. Connect the connector.

      3. A01IUF8

        Install the antenna cord with the bolt.

        8.4 N*m 85 kgf*cm 73 in.*lbf
  3. Click here

    INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    (Click here)

  4. Click here

    INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY


    1. w/o Roof Sunshade System:


      1. Align the marking tape on the antenna cord with the roof headlining tab shown in the part of the illustration labeled A, and wrap tape around the cord to install it.

      2. Starting from the front of the vehicle, attach the antenna cord to the roof headlining with tape at the 11 marked locations labeled "a".

      3. While adjusting the slack of the antenna cord, attach the antenna cord to the roof headlining with tape at the marked location labeled "b".

      4. A01IURTE01

        Set the antenna cord into the cutout of the roof headlining as shown in the part of the illustration labeled B.

    2. w/ Roof Sunshade System:


      1. Align the marking tape on the antenna cord with the roof headlining tab shown in the part of the illustration labeled A, and wrap tape around the cord to install it.

      2. Starting from the front of the vehicle, attach the antenna cord to the roof headlining with tape at the 11 marked locations labeled "a".

      3. While adjusting the slack of the antenna cord, attach the antenna cord to the roof headlining with tape at the marked location labeled "b".

      4. A01IRJSE01

        Set the antenna cord into the cutout of the roof headlining as shown in the part of the illustration labeled B.

  5. Click here

    INSTALL ROOF HEADLINING ASSEMBLY

    (Click here)

  6. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  7. Click here

    CHECK SRS WARNING LIGHT

    (Click here)