Click here

RADIO ANTENNA CORD REMOVAL

Click here
Click here Click here
  1. Click here

    PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. (Click here).

  2. Click here

    REMOVE ROOF HEADLINING ASSEMBLY

    (Click here)

  3. Click here

    REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY


    1. w/o Roof Sunshade System:


      1. A01ISZS

        Remove the antenna cord from the cutout at the back of the roof headlining.

      2. Remove all the tape and the antenna cord from the roof headlining.

    2. w/ Roof Sunshade System:


      1. A01IQ2R

        Remove the antenna cord from the cutout at the back of the roof headlining.

      2. Remove all the tape and the antenna cord from the roof headlining.

  4. Click here

    REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    (Click here)

  5. Click here

    REMOVE ANTENNA CORD SUB-ASSEMBLY (for LHD)


    1. w/o Digital Audio Broadcasting:


      1. Disconnect the connector.

      2. Remove the bolt.

      3. A01INM6

        Detach the 7 clamps and remove the antenna cord.

    2. w/ Digital Audio Broadcasting:


      1. Disconnect the connector.

      2. Remove the bolt.

      3. A01IR4D

        Detach the 7 clamps and remove the antenna cord.

  6. Click here

    REMOVE ANTENNA CORD SUB-ASSEMBLY (for RHD)


    1. w/o Digital Audio Broadcasting:


      1. Disconnect the connector.

      2. Remove the bolt.

      3. A01IQIS

        Detach the 7 clamps and remove the antenna cord.

    2. w/ Digital Audio Broadcasting:


      1. Disconnect the connector.

      2. Remove the bolt.

      3. A01IUF8

        Detach the 7 clamps and remove the antenna cord.