RADIO ANTENNA CORD REMOVAL


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. Click here.

  2. REMOVE ROOF HEADLINING ASSEMBLY

    Click here

  3. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY


    1. w/o Roof Sunshade System:


      1. Remove the antenna cord from the cutout at the back of the roof headlining.

        A01ISZS

      2. Remove all the tape and the antenna cord from the roof headlining.

    2. w/ Roof Sunshade System:


      1. Remove the antenna cord from the cutout at the back of the roof headlining.

        A01IQ2R

      2. Remove all the tape and the antenna cord from the roof headlining.

  4. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  5. REMOVE ANTENNA CORD SUB-ASSEMBLY (for LHD)


    1. w/o Digital Audio Broadcasting:


      1. Disconnect the connector.

      2. Remove the bolt.

      3. Detach the 7 clamps and remove the antenna cord.

        A01INM6

    2. w/ Digital Audio Broadcasting:


      1. Disconnect the connector.

      2. Remove the bolt.

      3. Detach the 7 clamps and remove the antenna cord.

        A01IR4D

  6. REMOVE ANTENNA CORD SUB-ASSEMBLY (for RHD)


    1. w/o Digital Audio Broadcasting:


      1. Disconnect the connector.

      2. Remove the bolt.

      3. Detach the 7 clamps and remove the antenna cord.

        A01IQIS

    2. w/ Digital Audio Broadcasting:


      1. Disconnect the connector.

      2. Remove the bolt.

      3. Detach the 7 clamps and remove the antenna cord.

        A01IUF8