RADIO RECEIVER INSTALLATION


  1. INSTALL NO. 2 RADIO BRACKET (for Radio Receiver Type)


    1. Install the No. 2 radio bracket with the 3 screws.

      Torque:
      4.0 N*m  { 40 kgf*cm, 35 in.*lbf }

  2. INSTALL NO. 2 RADIO BRACKET (for Radio and Display Type)


    1. Install the No. 2 radio bracket with the 3 screws.

      Torque:
      4.0 N*m  { 40 kgf*cm, 35 in.*lbf }

  3. INSTALL NO. 1 RADIO BRACKET (for Radio Receiver Type)


    1. Install the No. 1 radio bracket with the 3 screws.

      Torque:
      4.0 N*m  { 40 kgf*cm, 35 in.*lbf }

  4. INSTALL NO. 1 RADIO BRACKET (for Radio and Display Type)


    1. Install the No. 1 radio bracket with the 3 screws.

      Torque:
      4.0 N*m  { 40 kgf*cm, 35 in.*lbf }

  5. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)


    1. Connect the connectors.

    2. A01ISTA

      Insert the radio and display receiver assembly with bracket.

      Note

      When inserting the radio and display receiver, do not press the knobs on it.

    3. Install the radio and display receiver assembly with bracket with the 4 screws.

      Torque:
      4.0 N*m  { 40 kgf*cm, 35 in.*lbf }

  6. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    A01IRZ3

    1. Attach the 4 clips, 3 claws and 3 guides to install the center instrument cluster finish panel.

  7. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type)


    1. Connect the connectors.

    2. A01ITL8

      Insert the radio receiver assembly with bracket to attach the 4 clips on its backside.

      Note

      When inserting the radio receiver, do not press the knobs on it.

    3. Install the radio receiver assembly with bracket with the 4 screws.

      Torque:
      4.0 N*m  { 40 kgf*cm, 35 in.*lbf }

  8. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

    A01IQZA

    1. Connect the connector.

    2. Attach the 8 claws and 4 guides to install the center instrument panel register.

  9. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    A01IRVW

    1. for Automatic Air Conditioning System:

      Attach the 3 clips, claw and 2 guides to install the instrument panel finish panel end.

    2. A01ISYI

      for Manual Air Conditioning System:

      Attach the 3 clips, claw and guide to install the instrument panel finish panel end.

  10. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    A01IS29

    1. for Automatic Air Conditioning System:

      Attach the 3 clips and 2 guides to install the instrument panel finish panel end.

    2. A01INF5

      for Manual Air Conditioning System:

      Attach the 3 clips and guide to install the instrument panel finish panel end.

  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  12. INSTALL BATTERY SERVICE HOLE COVER


    1. A01ITOM

      Install the battery service hole cover with the clip.