REAR BUMPER REASSEMBLY


  1. INSTALL REFLEX REFLECTOR ASSEMBLY LH

    A01IOHP

    1. Attach the guide to install the reflex reflector assembly.

    2. Install the screw.

  2. INSTALL REFLEX REFLECTOR ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

    Tech Tips


    • Align the slit of the No. 1 ultrasonic sensor retainer with the protrusion of the rear bumper cover and install the No. 1 ultrasonic sensor retainer.

    • Pay attention to the protrusions of the rear bumper cover as the orientation of the retainer changes depending on the installation position.

    • Use the same procedure for both No. 1 ultrasonic sensor retainers.

    A01IUQTE01
    Text in Illustration
    *1 Rear View of Rear Bumper - -

    1. A01IQCAE01
      Text in Illustration
      *1 Slit
      *2 Protrusion

      Attach the 4 claws to install the No. 1 ultrasonic sensor retainer to the rear bumper cover.

      Note

      Do not damage the bumper cover with the protrusion when installing the retainer.

  4. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

    Tech Tips


    • Align the slit of the No. 2 ultrasonic sensor retainer with the protrusion of the rear bumper cover and install the No. 2 ultrasonic sensor retainer.

    • Use the same procedure for both No. 2 ultrasonic sensor retainers.

    A01IP07E01
    Text in Illustration
    *1 Rear View of Rear Bumper - -

    1. A01IQWME01
      Text in Illustration
      *1 Slit
      *2 Protrusion

      Attach the 3 claws to install the No. 2 ultrasonic sensor retainer to the rear bumper cover.

      Note

      Do not damage the bumper cover with the protrusion when installing the retainer.

  5. INSTALL NO. 1 ULTRASONIC SENSOR CLIP (w/ TOYOTA Parking Assist-sensor System)

    A01IOCU

    Tech Tips

    Use the same procedure for both No. 1 ultrasonic sensor clips.


    1. Attach the claw to install the No. 1 ultrasonic sensor clip.

  6. INSTALL NO. 2 ULTRASONIC SENSOR CLIP (w/ TOYOTA Parking Assist-sensor System)

    A01ITI2

    Tech Tips

    Use the same procedure for both No. 2 ultrasonic sensor clips.


    1. Attach the claw to install the No. 2 ultrasonic sensor clip.

  7. INSTALL NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

    A01IRZT

    Tech Tips

    Use the same procedure for all ultrasonic sensors.


    1. Attach the 2 claws to install the ultrasonic sensor.

  8. INSTALL NO. 4 FLOOR WIRE (w/ TOYOTA Parking Assist-sensor System)


    1. When using a new rear bumper cover:

      Clean the rear bumper cover surface.

    2. When reusing the rear bumper cover:

      Wipe off any tape adhesive residue with cleaner.

    3. Attach the 4 clamps to install the No. 4 floor wire.

    4. Connect the 4 connectors.

    5. Install 4 new pieces of tape as shown in the illustration.

      Tech Tips

      Align the tape with the mark-off line of the rear bumper.

      A01IU7EE01
      Text in Illustration
      *1 Tape - -