FRONT BUMPER INSTALLATION

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.

INSTALL FRONT WHEEL OPENING EXTENSION PAD LH
1. Install the front wheel opening extension pad LH with the 3 screws.
INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

Tech Tips

Use the same procedure described for the LH side.
INSTALL FRONT BUMPER SIDE RETAINER LH
1. Attach the 2 claws to install the front bumper side retainer LH.
2. Install the screw and bolt.
INSTALL FRONT BUMPER SIDE RETAINER RH

Tech Tips

Use the same procedure described for the LH side.
INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
1. Install the front bumper reinforcement sub-assembly with the 8 bolts.
  
  Torque:
  
  50 N*m { 510 kgf*cm, 37 ft.*lbf }
2. Attach the 5 clamps.
INSTALL FRONT BUMPER ENERGY ABSORBER
1. Install the front bumper energy absorber.
INSTALL FRONT BUMPER COVER
1. Install the front bumper cover.
  1. w/ Headlight Cleaner System:
    
    Connect the headlight cleaner hose.
  2. w/ Fog Light:
    
    Connect the 2 fog light connectors.
  3. w/ TOYOTA Parking Assist-sensor System:
    
    Connect the No. 4 engine room wire connector.
  4. Attach the 6 claws to install the front bumper cover.
2. Install the bolt, 2 clips and 6 screws.
3. Install the pin hold clip.
  
  Note
  
  Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.
  
  Tech Tips
  
  Use the same procedure for the RH side and LH side.
4. Install the screw.
  
  Tech Tips
  
  Use the same procedure for the RH side and LH side.
INSTALL RADIATOR GRILLE PROTECTOR
1. Install the 2 radiator grille protectors.
INSTALL RADIATOR SUPPORT OPENING COVER
1. Install the radiator support opening cover with the 5 clips.
INSTALL BATTERY SERVICE HOLE COVER
1. Install the battery service hole cover with the clip.
ADJUST FOG LIGHT ASSEMBLY
1. Adjust the fog light assembly Click here.