FRONT BUMPER REMOVAL


  1. REMOVE RADIATOR SUPPORT OPENING COVER


    1. A01IQMS

      Remove the 3 clips.

    2. Detach the 4 hooks and remove the radiator support opening cover.

  2. REMOVE RADIATOR GRILLE PROTECTOR

    A01IQXK

    1. Remove the 2 radiator grille protectors.

  3. REMOVE FRONT SPOILER SIDE PROTECTOR LH


    1. A01ITXX

      Remove the 10 clips and front spoiler side protector LH.

  4. REMOVE FRONT SPOILER SIDE PROTECTOR RH


    1. A01ITHW

      Detach the claw and remove the front spoiler side protector RH.

  5. REMOVE FRONT SPOILER COVER LH


    1. A01IUQQ

      Remove the 7 screws.

    2. A01IO67

      Detach the 10 claws and remove the front spoiler cover LH.

  6. REMOVE FRONT SPOILER COVER RH


    1. A01IS9U

      Detach the claw and remove the front spoiler cover RH.

  7. REMOVE FRONT BUMPER COVER

    A01INTWE01

    1. Using a screwdriver, remove the pin hold clip.

      Tech Tips

      Use the same procedure for the RH and LH sides.

    2. Remove the screw.

      Tech Tips

      Use the same procedure for the RH and LH sides.

    3. Put protective tape around the front bumper cover.

    4. Remove the bolt and 2 clips.

      A01IQQPE01
      Text in Illustration
      *1 Protective Tape - -

    5. Remove the front bumper cover.


      1. Detach the 6 claws.

      2. w/ Headlight Cleaner System:

        Disconnect the headlight cleaner hose and then drain the washer fluid.

        Tech Tips

        Use a container to collect the washer fluid.

      3. Disconnect the 2 fog light connectors.

      4. w/ TOYOTA Parking Assist-sensor System:

        Disconnect the No. 4 engine room wire connector.

      5. Remove the front bumper cover.

        A01ITLFE01
        Text in Illustration
        *1 Protective Tape - -

  8. REMOVE FRONT BUMPER ENERGY ABSORBER

    A01IP8J

    1. Remove the front bumper energy absorber.

  9. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

    A01ITDH

    1. Detach the 4 clamps.

    2. Remove the 8 bolts and front bumper reinforcement.

  10. REMOVE FRONT BUMPER SIDE RETAINER LH

    A01INQBE01
    Text in Illustration
    *1 Protective Tape

    1. Remove the screw and bolt.

    2. Using a clip remover, detach the 2 claws and remove the front bumper side retainer.

      Note

      Tape the clip remover tip before use.

  11. REMOVE FRONT BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure described for the LH side.

  12. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

    A01IP6A

    1. Remove the 3 screws and front wheel opening extension pad.

  13. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

    Tech Tips

    Use the same procedure described for the LH side.