REAR SPOILER INSTALLATION

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL REAR SPOILER SUB-ASSEMBLY

    A01IOQL

    1. Attach the 4 clips and pin to install the rear spoiler.

    2. A01IQIZ

      Install the 4 nuts.

  2. INSTALL NO. 2 BACK DOOR PANEL PROTECTOR


    1. Clean the vehicle body surface.


      1. Remove the double-sided tape from the vehicle body surface.

      2. Wipe off any tape adhesive residue with cleaner.

    2. Install the No. 2 back door panel protector.


      1. A01ISRXE01
        Text in Illustration
        *1 Double-sided Tape

        Apply double-sided tape to the No. 2 back door panel protector in the position shown in the illustration.

      2. Remove the peeling paper from the double-sided tape on the No. 2 back door panel protector.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. A01IU2V

        Install the No. 2 back door panel protector with the clip.

  3. INSTALL NO. 1 BACK DOOR PANEL PROTECTOR

    Tech Tips

    Use the same procedure described for the No. 2 back door panel protector.

  4. INSTALL CENTER BACK DOOR GARNISH


    1. A01IOP0

      Attach the 4 claws and 4 clips to install the center back door garnish.