STOP LIGHT CONTROL RELAY (for RHD) REMOVAL


  1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    A01IP4S

    1. Push in the sides of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.

    2. Detach the glove compartment door stopper from the glove compartment door as shown in the illustration.

    3. A01IP3S

      Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.

  2. REMOVE STOP LIGHT CONTROL RELAY ASSEMBLY


    1. A01IU4F

      Disconnect the connector.

    2. Detach the clip and remove the relay.