AUTOMATIC LIGHT CONTROL SENSOR REMOVAL

Tech Tips


  • Use the same procedure for LHD and RHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE NO. 1 RAIN SENSOR COVER


    1. A01IPUT

      Using moulding remover A, detach the 3 claws and disconnect the rain sensor cover.

    2. A01IOSH

      Detach the 2 claws and remove the rain sensor cover.

  2. REMOVE NO. 2 RAIN SENSOR COVER


    1. A01IOJG

      Using a screwdriver, detach the 2 claws and remove the No. 2 rain sensor cover.

  3. REMOVE RAIN SENSOR


    1. A01ISMX

      Detach the 2 claws and remove the rain sensor.

      Note

      Do not touch the silicon mixture directly with your finger.

    2. A01INSW

      Disconnect the connector.

      Note

      Do not touch the silicon mixture directly with your finger.