HEADLIGHT DIMMER SWITCH REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE SPIRAL CABLE SUB-ASSEMBLY


    1. Remove the spiral cable Click here.

  2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A01IQCF

      Disconnect the connectors.

    2. Using a screwdriver, detach the claw and remove the windshield wiper switch.

      Tech Tips

      Tape the screwdriver tip before use.

      Note

      If the claw is pressed forcefully, it will break.

  3. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY


    1. A01ITRF

      Disconnect the connector.

    2. A01IRK9

      While loosening the band clamp as shown in the illustration, detach the claw to remove the headlight dimmer switch.

      Note

      If the claw is pressed forcefully, it will break.