STOP LIGHT SWITCH INSTALLATION

INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER

1. Install the stop light switch mounting adjuster to the pedal support.

INSTALL STOP LIGHT SWITCH ASSEMBLY

1. 

   Text in Illustration

   *1	Brake Pedal
   *2	Adjuster
   *3	Stop Light Switch

   Install the stop light switch to the adjuster until the switch body slightly touches the brake pedal.

   Note

   Do not depress the brake pedal.

2. 

   Text in Illustration

   *1	Shaft
   *2	1.5 to 2.5 mm (0.0590 to 0.0984 in.)
   *3	Stop Light Switch

   Rotate the stop light switch counterclockwise so that the clearance is between 1.5 and 2.5 mm (0.0590 to 0.0984 in.) as shown in the illustration.

   Torque:

   1.5 N*m  { 15 kgf*cm, 13 in.*lbf }

   Note

   Do not depress the brake pedal.

3. Check the stop light switch clearance.

   Stop light switch clearance
   1.5 to 2.5 mm (0.0590 to 0.0984 in.)

4. Connect the connector to the stop light switch.