Click here

STOP LIGHT SWITCH INSPECTION

Click here
Click here Click here
  1. Click here

    INSPECT STOP LIGHT SWITCH ASSEMBLY


    1. A01ISYFE01

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 Pin pushed 10 kΩ higher
      Pin released Below 8.3 Ω
      3 - 4 Pin pushed Below 1.6 Ω
      Pin released 10 kΩ higher

      If the result is not as specified, replace the stop light switch assembly.