Click here

REAR COMBINATION LIGHT ASSEMBLY (w/o Rear No. 2 Seat) REMOVAL

Click here
Click here Click here
Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

Click here
  1. Click here

    REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Remove the tonneau cover.

  2. Click here

    REMOVE NO. 1 DECK BOARD


    1. Remove the No. 1 deck board.

  3. Click here

    REMOVE NO. 2 DECK BOARD


    1. Detach the 5 clips and remove the No. 2 deck board.

  4. Click here

    REMOVE FRONT DECK FLOOR BOX


    1. Remove the 3 bolts and front deck floor box.

  5. Click here

    REMOVE LOWER DECK TRIM SIDE BOARD LH


    1. Detach the claw and 2 guides, and remove the lower deck trim side board.

  6. Click here

    REMOVE LOWER DECK TRIM SIDE BOARD RH

    Tip:

    Use the same procedure described for the LH side.

  7. Click here

    REMOVE DECK FLOOR BOX LH


    1. w/o Rear No. 2 Seat:


      1. Detach the 4 claws and remove the deck floor box.

    2. A01IN2Q

      w/ Rear No. 2 Seat:


      1. Remove the bolt.

      2. Detach the 3 claws and guide, and remove the deck floor box.

  8. Click here

    REMOVE DECK FLOOR BOX RH


    1. w/o Rear No. 2 Seat:


      1. Detach the 2 claws and guide, and remove the deck floor box.

    2. A01IPFF

      w/ Rear No. 2 Seat:


      1. Remove the bolt.

      2. Detach the 2 claws and guide, and remove the deck floor box.

  9. Click here

    REMOVE REAR DECK FLOOR BOX (w/ Spare Tire)


    1. A01IO7TE01

      Remove the rear deck floor box.

  10. Click here

    REMOVE REAR DECK TRIM COVER


    1. Detach the 6 claws and 4 guides, and remove the rear deck trim cover.

  11. Click here

    REMOVE REAR DOOR SCUFF PLATE LH


    1. Detach the 9 claws and 2 clips, and remove the rear door scuff plate.

  12. Click here

    REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH


    1. Remove the rear door opening trim weatherstrip.

  13. Click here

    REMOVE FRONT DECK SIDE TRIM COVER LH


    1. Using a screwdriver, detach the 2 claws and remove the front deck side trim cover.

      Tip:

      Tape the screwdriver tip before use.

      Table 1. Text in Illustration
      *1 Protective Tape
  14. Click here

    REMOVE DECK TRIM SIDE SERVICE HOLE COVER

    Tip:

    Use the same procedure to remove the deck trim side service hole cover on the other side.


    1. Using a screwdriver, detach the 4 claws and 2 guides, and remove the deck trim side service hole cover.

      Tip:

      Tape the screwdriver tip before use.

      Table 2. Text in Illustration
      *1 Protective Tape
  15. Click here

    REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Tip:

    Use the same procedure for all the luggage hold belt strikers.


    1. Remove the bolt and luggage hold belt striker.

  16. Click here

    REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH


    1. w/ Rear No. 1 Seat:

      Remove the bolt and rear No. 1 seat belt anchor.

    2. A01IRRR

      w/ Rear No. 2 Seat:

      Remove the bolt and rear No. 2 seat belt anchor

    3. Remove the 2 bolts.

    4. Detach the 6 clips and 7 claws.

    5. A01ISVL

      Disconnect the connector and remove the deck trim side panel.

  17. Click here

    REMOVE REAR COMBINATION LIGHT LENS AND BODY LH


    1. A01IOA9

      Disconnect the connector.

    2. Remove the 3 nuts.

    3. Detach the clip and remove the rear combination light lens and body.