HEADLIGHT ASSEMBLY (for HID Headlight) REPAIR

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER LH

    Tech Tips


    • If the installation area of the headlight is damaged, use the supply retainer for low-cost repair.

    • Make sure that the headlight is not damaged.


    1. A01IPFM

      Cut off the part shaded in the illustration and smooth the area with sandpaper.

      Note

      After cutting off the part, place the headlight protector retainer against the bosses and file away the old retainer if it interferes with the installation of the supply retainer.

    2. A01INGY

      Install the headlight protector retainer with the 2 screws.

  2. INSTALL LOWER HEADLIGHT PROTECTOR RETAINER LH

    Tech Tips


    • If the installation area of the headlight is damaged, use the supply retainer for low-cost repair.

    • Make sure that the headlight is not damaged.


    1. A01IU4H

      Cut off the part shaded in the illustration and smooth the area with sandpaper.

      Note

      After cutting off the part, place the headlight protector retainer against the bosses and file away the old retainer if it interferes with the installation of the supply retainer.

    2. A01IPOI

      Install the headlight protector retainer with the 2 screws.

  3. INSTALL LOWER HEADLIGHT BRACKET LH

    Tech Tips


    • If the installation area of the headlight is damaged, use the supply bracket for low-cost repair.

    • Make sure that the headlight is not damaged.


    1. A01IQVP

      Remove the screw and bracket.

    2. A01IQVP

      Install the headlight bracket with the screw.