HEADLIGHT ASSEMBLY (for HID Headlight) INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL HEADLIGHT ASSEMBLY LH

    A01IORTE01
    Text in Illustration
    *1 Protective Tape
    *2 Bolt
    *3 Screw

    1. Put protective tape around the headlight assembly LH.

    2. Connect each connector.

    3. Attach the claw to install the headlight assembly LH.

    4. Install the bolt and 2 screws.

  2. INSTALL FRONT FENDER REINFORCEMENT SUB-ASSEMBLY TOP LH


    1. Attach the 2 claws to install the front fender reinforcement sub-assembly top LH.

    2. Install the 2 clips.

  3. INSTALL FRONT BUMPER COVER

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. ADJUST HEADLIGHT AIMING

    Click here

  6. ADJUST FOG LIGHT AIMING

    Click here