REAR COMBINATION LIGHT ASSEMBLY (w/o Rear No. 2 Seat) INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL REAR COMBINATION LIGHT LENS AND BODY LH


    1. A01IOA9

      Attach the clip to install the rear combination light lens and body.

    2. Install the 3 nuts.

    3. Connect the connector.

  2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH


    1. Connect the connector.

    2. Attach the 6 clips and 7 claws to install the deck trim side panel.

    3. Install the 2 bolts.

      A01ISVL
    4. A01IULD

      w/ Rear No. 1 Seat:

      Install the rear No. 1 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    5. A01IRRR

      w/ Rear No. 2 Seat:

      Install the rear No. 2 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  3. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

    A01IUD8

    Tech Tips

    Use the same procedure for all the luggage hold belt strikers.


    1. Install the luggage hold belt striker with the bolt.

  4. INSTALL DECK TRIM SIDE SERVICE HOLE COVER

    A01IQ10

    Tech Tips

    Use the same procedure to install the deck trim side service hole cover on the other side.


    1. Attach the 4 claws and 2 guides to install the deck trim side service hole cover.

  5. INSTALL FRONT DECK SIDE TRIM COVER LH

    A01IUCE

    1. Attach the 2 claws to install the front deck side trim cover.

  6. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    A01IP6WE01
    Text in Illustration
    *1 Paint Mark
    *2 Mark Position

    1. Align the paint mark on the rear door opening trim weatherstrip with the mark position on the vehicle and install the weatherstrip as shown in the illustration.

  7. INSTALL REAR DOOR SCUFF PLATE LH

    A01IQ4G

    1. Attach the 9 claws and 2 clips to install the rear door scuff plate.

  8. INSTALL REAR DECK TRIM COVER

    A01ITUG

    1. Attach the 6 claws and 4 guides to install the rear deck trim cover.

  9. INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)


    1. Install the rear deck floor box.

      A01IO7TE01

  10. INSTALL DECK FLOOR BOX LH

    A01IU1X

    1. w/o Rear No. 2 Seat:


      1. Attach the 4 claws to install the deck floor box.

    2. A01IN2Q

      w/ Rear No. 2 Seat:


      1. Attach the 3 claws and guide to install the deck floor box.

      2. Install the bolt.

  11. INSTALL DECK FLOOR BOX RH

    A01ISZR

    1. w/o Rear No. 2 Seat:


      1. Attach the 2 claws and guide to install the deck floor box.

    2. A01IPFF

      w/ Rear No. 2 Seat:


      1. Attach the 2 claws and guide to install the deck floor box.

      2. Install the bolt.

  12. INSTALL LOWER DECK TRIM SIDE BOARD LH

    A01IN88

    1. Attach the claw and 2 guides to install the lower deck trim side board.

  13. INSTALL LOWER DECK TRIM SIDE BOARD RH

    Tech Tips

    Use the same procedure described for the LH side.

  14. INSTALL FRONT DECK FLOOR BOX

    A01INUT

    1. Install the front deck floor box with the 3 bolts.

  15. INSTALL NO. 2 DECK BOARD

    A01IUJ6

    1. Attach the 5 clips to install the No. 2 deck board.

  16. INSTALL NO. 1 DECK BOARD

    A01IO5W

    1. Install the No. 1 deck board.

  17. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    A01IUDC

    1. Install the tonneau cover.