REAR COMBINATION LIGHT ASSEMBLY (w/o Rear No. 2 Seat) INSPECTION


  1. INSPECT REAR COMBINATION LIGHT LENS AND BODY LH


    1. A01ITXZE01
      Text in Illustration
      *1

      Component without harness connected

      (Rear Combination Light Lens and Body)

      Check the stop light.


      1. Apply battery voltage to the connector and check the LED illumination condition.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 5 (STOP)

        Battery negative (-) → 6 (E)

        		 LED illuminates

        If the result is not as specified, replace the rear combination light lens and body.

  2. INSPECT REAR COMBINATION LIGHT LENS AND BODY RH


    1. A01ITXZE02
      Text in Illustration
      *1

      Component without harness connected

      (Rear Combination Light Lens and Body)

      Check the stop light.


      1. Apply battery voltage to the connector and check the LED illumination condition.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 2 (STOP)

        Battery negative (-) → 1 (E)

        		 LED illuminates

        If the result is not as specified, replace the rear combination light lens and body.