HEADLIGHT ASSEMBLY (for Halogen Headlight) REPAIR

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • If the installation area of the headlight assembly is damaged, use the supply retainer for low-cost repair.

  • Make sure that the headlight assembly is not damaged.


  1. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER LH

    A01IN7O

    1. Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the upper headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A01IO24

      Install the upper headlight protector retainer LH with the 2 screws.

  2. INSTALL LOWER HEADLIGHT PROTECTOR RETAINER LH

    A01IT5I

    1. Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the lower headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A01IR9Z

      Install the lower headlight protector retainer LH with the 2 screws.