HEADLIGHT ASSEMBLY (for Halogen Headlight) DISASSEMBLY

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE NO. 1 HEADLIGHT BACK COVER

    A01IS7N

    1. Turn the No. 1 headlight back cover in the direction indicated by the arrow to remove it.

  2. REMOVE NO. 1 HEADLIGHT BULB

    A01INOU

    1. Disconnect the connector.

    2. Turn the No. 1 headlight bulb in the direction indicated by the arrow to remove it.

      Note

      Do not touch the glass part of the bulb.

  3. REMOVE NO. 2 HEADLIGHT BACK COVER

    A01IRHE

    1. Turn the No. 2 headlight back cover in the direction indicated by the arrow to remove it.

  4. REMOVE NO. 2 HEADLIGHT BULB

    A01IQSA

    1. Disconnect the connector.

    2. Turn the No. 2 headlight bulb in the direction indicated by the arrow to remove it.

      Note

      Do not touch the glass part of the bulb.

  5. REMOVE CLEARANCE LIGHT SOCKET

    A01IQ4U

    1. Turn the clearance light socket in the direction indicated by the arrow to remove it.

  6. REMOVE CLEARANCE LIGHT BULB

    A01ISS0

    1. Remove the clearance light bulb from the clearance light socket.

  7. REMOVE FRONT TURN SIGNAL LIGHT SOCKET

    A01INXA

    1. Turn the front turn signal light socket in the direction indicated by the arrow to remove it.

  8. REMOVE FRONT TURN SIGNAL LIGHT BULB

    A01IPIL

    1. Remove the front turn signal light bulb from the front turn signal light socket.