Click here

HEADLIGHT ASSEMBLY (for HID Headlight) REASSEMBLY

Click here
Click here Click here
Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

Click here
  1. Click here

    INSTALL FRONT TURN SIGNAL LIGHT BULB


    1. Install the front turn signal light bulb to the front turn signal light socket.

  2. Click here

    INSTALL FRONT TURN SIGNAL LIGHT SOCKET


    1. Turn the front turn signal light socket in the direction indicated by the arrow to install it.

  3. Click here

    INSTALL DISCHARGE HEADLIGHT BULB


    1. Set the discharge headlight bulb to the headlight unit.

    2. Lock the set spring in the order shown in the illustration to install the discharge headlight bulb to the headlight unit.

      Note:

      Do not touch the discharge headlight bulb glass.

  4. Click here

    INSTALL HEADLIGHT GASKET


    1. Install a new headlight gasket to the headlight light control ECU sub-assembly.

  5. Click here

    INSTALL HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY LH


    1. Turn the headlight light control ECU sub-assembly socket in the direction indicated by the arrow in the illustration to connect the headlight light control ECU sub-assembly socket.

      Note:

      • Check that the headlight gasket is installed on the headlight light control ECU subassembly LH.

      • Check that the headlight gasket is not damaged or contaminated with foreign matter. If there is any damage, replace the headlight gasket with a new one.

      • Do not pull the headlight light control ECU sub-assembly LH with the socket connected.

    2. A01IPKJ

      Turn the headlight light control ECU sub-assembly LH in the direction indicated by the arrow in the illustration to install the headlight light control ECU sub-assembly LH to the headlight unit.