LIGHTING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Utility / Customize Setting.

    5. Select the setting by referring to the table below.

      Light Control
      Display Default Content Setting
      Sensitivity NORMAL A function to adjust the ambient light sensitivity of the automatic light control system.* Light2/Light1/Normal/Dark1/Dark2
      DRL Function ON A function that enables or disables the DRL. ON/OFF

      Tech Tips

      *: The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

      Sensitivity of Automatic Light Control System
      System Setting A01IQM8
      Setting Dark2 Dark1 Normal Light1 Light2

      Tech Tips

      When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.