Click here

WIPER ECU (for LHD) INSTALLATION

Click here
Click here Click here
Tip:

A bolt without a torque specification is shown in the standard bolt chart (Click here).

Click here
  1. Click here

    INSTALL WINDSHIELD WIPER RELAY ASSEMBLY


    1. Attach the 2 claws to install the windshield wiper relay assembly.

  2. Click here

    INSTALL ECU INTEGRATION BOX RH


    1. Install the ECU integration box RH with the 2 nuts and bolt.

    2. Connect each connector.

    3. Attach the clamp.

  3. Click here

    INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY


    1. Attach the 2 hinges to install the glove compartment door.

    2. A01ISP7E01

      Attach the glove compartment door stopper to the glove compartment door as shown in the illustration.

    3. While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the glove compartment door to engage the 2 stoppers.

      Table 1. Text in Illustration
      *1 Stopper
  4. Click here

    INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Attach the 3 claws and guide to install the No. 2 instrument panel under cover.

  5. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).