Click here

HEADLIGHT CLEANER MOTOR INSPECTION

Click here
Click here Click here
  1. Click here

    INSPECT HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY


    1. Remove the washer jar.

    2. Disconnect the headlight cleaner washer motor and pump connector.

      Tip:

      Make sure that the headlight cleaner washer motor and pump is installed to the washer jar.

    3. Fill the washer jar with washer fluid.

    4. A01IQMFE01

      Connect the positive (+) lead of the battery to terminal 1 of the headlight cleaner washer motor and pump, and the negative (-) lead to terminal 2.

      Table 1. Text in Illustration
      *1

      Component without harness connected

      (Headlight Cleaner Motor and Pump Assembly)

    5. Check that washer fluid flows from the washer jar.

      OK
      Washer fluid flows from the washer jar.

      If the result is not as specified, replace the headlight cleaner motor and pump assembly.