REAR WIPER RUBBER INSTALLATION


  1. INSTALL REAR WIPER RUBBER


    1. A01IQ9ME01

      Install the 2 backing plates as shown in the illustration.

      Note

      Install the backing plates so that they are facing in the correct direction.

    2. A01IO5IE01
      Text in Illustration
      *1 Second Claw
      *2 Rear End Claw
      *3 Rear End Stopper

      Insert the wiper rubber into the front end of the wiper blade and slide it towards the rear end through the second claw.

    3. After pushing the wiper rubber through the rear end claw, allow it to protrude past the rear end stopper.

    4. A01INVTE01
      Text in Illustration
      *1 Front End Claw

      Slide the wiper rubber through the front end claw.

  2. INSTALL REAR WIPER BLADE


    1. A01IOLE

      Push the wiper blade straight toward the left side of the vehicle to attach the claw and install the wiper blade to the wiper arm.

      Note

      Be careful not to damage the claw.

    2. Close the wiper blade holder.