OUTER REAR VIEW MIRROR DISASSEMBLY

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE MIRROR SUB-ASSEMBLY LH

    A01IQLFE01

    1. Put protective tape around the mirror sub-assembly LH.

      Text in Illustration
      *1 Moulding Remover
      *2 Protective Tape

    2. Using a moulding remover, detach the 8 claws at the mirror sub-assembly LH as shown in the illustration.

    3. A01IS0A

      Disconnect the 2 connectors and remove the mirror sub-assembly LH.

  2. REMOVE OUTER MIRROR COVER LH

    A01INQGE01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 6 claws and remove the outer mirror cover LH.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE SIDE TURN SIGNAL LIGHT LENS LH

    A01ISKWE01

    1. Put protective tape around the visor cover LH.

      Text in Illustration
      *1 Protective Tape

    2. Detach the 7 claws to remove the visor cover LH.

    3. A01IO07

      Detach the claws and guide.

    4. A01IPA0

      Disconnect the side turn signal light bulb socket to remove the side turn signal light lens LH.

  4. REMOVE SIDE TURN SIGNAL LIGHT BULB


    1. A01IQ2G

      Remove the side turn signal light bulb from the side turn signal light bulb socket.