FUEL LID LOCK CONTROL CABLE ASSEMBLY (for RHD) INSTALLATION

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.

INSTALL FUEL FILLER OPENING LID LOCK RETAINER
1. Install the fuel filler opening lid lock retainer by rotating it as shown in the illustration.
INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY
1. Attach the clamps to install the fuel lid lock control cable.
  
  Text in Illustration
  
  *1 Wire Harness *2 Fuel Lid Lock Control Cable
2. Attach the 2 claws to install the fuel lid lock control cable to the fuel filler opening lid lock retainer.

Text in Illustration
*1	Wire Harness	*2	Fuel Lid Lock Control Cable

INSTALL FRONT FLOOR FRONT CARPET ASSEMBLY

Text in Illustration
*1	Floor Carpet Hook
*2	Front Floor Front Carpet

Return the floor front carpet to its original position and attach the 6 clamps.

Attach the clip.

INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY
1. Attach the grommet.
2. Connect the fuel lid lock control cable.
3. Move the fuel lid lock open lever in the direction indicated by the arrow in the illustration to attach the claw and install the lever.
4. Install the screw.
  
  Torque:
  
  5.5 N*m { 56 kgf*cm, 49 in.*lbf }
INSTALL FRONT FLOOR REAR NO. 2 PAD
INSTALL FRONT FLOOR REAR NO. 1 PAD
INSTALL NO. 2 FLOOR BOARD
INSTALL NO. 1 FLOOR BOARD
INSTALL CONSOLE BOX ASSEMBLY
1. Install the console box assembly Click here.
INSTALL FRONT SEAT ASSEMBLY
1. Install the front seat assembly Click here.
INSTALL REAR NO. 1 SEAT ASSEMBLY (w/ Rear No. 1 Seat)
1. Install the rear No. 1 seat assembly Click here.
INSTALL REAR DOOR SCUFF PANEL LH
1. Attach the 5 claws and guide to install the rear door scuff panel.
INSTALL FRONT DOOR SCUFF PLATE LH
1. Attach the 8 claws and 2 clips to install the front door scuff plate.
INSTALL REAR DOOR SCUFF PANEL RH

Tech Tips

Use the same procedure described for the LH side.
INSTALL FRONT DOOR SCUFF PLATE RH

Tech Tips

Use the same procedure described for the LH side.
INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
1. Connect the connector.
2. Attach the 6 clips and 7 claws to install the deck trim side panel.
3. Install the 2 bolts.
4. w/ Rear No. 1 Seat:
  
  Install the rear No. 1 seat belt anchor with the bolt.
  
  Torque:
  
  42 N*m { 428 kgf*cm, 31 ft.*lbf }
5. w/ Rear No. 2 Seat:
  
  Install the rear No. 2 seat belt anchor with the bolt.
  
  Torque:
  
  42 N*m { 428 kgf*cm, 31 ft.*lbf }
INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY
Tech Tips

Use the same procedure for all the luggage hold belt strikers.
1. Install the luggage hold belt striker with the bolt.
INSTALL DECK TRIM SIDE SERVICE HOLE COVER
Tech Tips

Use the same procedure to install the deck trim side service hole cover on the other side.
1. Attach the 4 claws and 2 guides to install the deck trim side service hole cover.
INSTALL FRONT DECK SIDE TRIM COVER LH
1. Attach the 2 claws to install the front deck side trim cover.
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
Text in Illustration

*1 Paint Mark

*2 Mark Position
1. Align the paint mark on the rear door opening trim weatherstrip with the mark position on the vehicle and install the weatherstrip as shown in the illustration.
INSTALL REAR DOOR SCUFF PLATE LH
1. Attach the 9 claws and 2 clips to install the rear door scuff plate.
INSTALL REAR DOOR SCUFF PLATE RH

Tech Tips

Use the same procedure described for the LH side.
INSTALL REAR DECK TRIM COVER
1. Attach the 6 claws and 4 guides to install the rear deck trim cover.
INSTALL REAR DECK FLOOR BOX (w/o Rear No. 2 Seat)
1. Install the rear deck floor box.
INSTALL REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)
1. Place the rear No. 2 seat assembly in the cabin.
  
  Note
  
  Be careful not to damage the vehicle body.
2. Temporarily install the 2 bolts.
3. Pull the 2 straps and raise the 2 seatbacks.
4. Temporarily install the 5 bolts.
5. Tighten the bolts in the order shown in the illustration.
  
  Torque:
  
  37 N*m { 377 kgf*cm, 27 ft.*lbf }
6. Connect the connector under the seat.
INSTALL REAR NO. 2 SEAT TRACK COVER (w/ Rear No. 2 Seat)
1. Attach the 2 guides and claw.
2. Attach the 2 claws to install the cover.
INSTALL REAR NO. 2 SEAT TRACK BRACKET COVER (w/ Rear No. 2 Seat)
Tech Tips

Use the same procedure to install the cover on the other side.
1. Attach the 2 claws to install the cover.
INSTALL DECK TRIM SIDE BELT HOLE COVER LH (w/ Rear No. 2 Seat)
1. Slide the deck trim side belt hole cover in the direction indicated by the arrow in the illustration and attach the 2 claws and 6 guides to install it.
INSTALL DECK TRIM SIDE BELT HOLE COVER RH (w/ Rear No. 2 Seat)

Tech Tips

Use the same procedure described for the LH side.
INSTALL DECK FLOOR BOX LH
1. w/o Rear No. 2 Seat:
  1. Attach the 4 claws to install the deck floor box.
2. w/ Rear No. 2 Seat:
  1. Attach the 3 claws and guide to install the deck floor box.
  2. Install the bolt.
INSTALL DECK FLOOR BOX RH
1. w/o Rear No. 2 Seat:
  1. Attach the 2 claws and guide to install the deck floor box.
2. w/ Rear No. 2 Seat:
  1. Attach the 2 claws and guide to install the deck floor box.
  2. Install the bolt.
INSTALL LOWER DECK TRIM SIDE BOARD LH (w/o Rear No. 2 Seat)
1. Attach the claw and 2 guides to install the lower deck trim side board.
INSTALL LOWER DECK TRIM SIDE BOARD RH (w/o Rear No. 2 Seat)

Tech Tips

Use the same procedure described for the LH side.
INSTALL DECK RAIL COVER (w/ Rear No. 2 Seat, w/o Spare Tire)
1. Attach the 2 claws and 2 guides to install the deck rail cover.
2. Install the clip.
INSTALL LUGGAGE COMPARTMENT TRAY (w/ Rear No. 2 Seat, w/ Spare Tire)
1. Install the luggage compartment tray.
INSTALL FRONT DECK FLOOR BOX (w/o Rear No. 2 Seat)
1. Install the front deck floor box with the 3 bolts.
INSTALL DECK BOARD ASSEMBLY (w/ Rear No. 2 Seat)
1. Attach the 4 claws and 6 clips to install the deck board.
INSTALL NO. 2 DECK BOARD (w/o Rear No. 2 Seat)
1. Attach the 5 clips to install the No. 2 deck board.
INSTALL NO. 1 DECK BOARD (w/o Rear No. 2 Seat)
1. Install the No. 1 deck board.
INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
1. Install the tonneau cover.