Click here

FUEL LID LOCK CONTROL CABLE ASSEMBLY (for LHD) REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Remove the tonneau cover.

  2. Click here

    REMOVE NO. 1 DECK BOARD (w/o Rear No. 2 Seat)


    1. Remove the No. 1 deck board.

  3. Click here

    REMOVE NO. 2 DECK BOARD (w/o Rear No. 2 Seat)


    1. Detach the 5 clips and remove the No. 2 deck board.

  4. Click here

    REMOVE DECK BOARD ASSEMBLY (w/ Rear No. 2 Seat)


    1. Detach the 4 claws and 6 clips, and remove the deck board.

  5. Click here

    REMOVE FRONT DECK FLOOR BOX (w/o Rear No. 2 Seat)


    1. Remove the 3 bolts and front deck floor box.

  6. Click here

    REMOVE LUGGAGE COMPARTMENT TRAY (w/ Rear No. 2 Seat, w/ Spare Tire)


    1. Remove the luggage compartment tray.

  7. Click here

    REMOVE DECK RAIL COVER (w/ Rear No. 2 Seat, w/o Spare Tire)


    1. Remove the clip.

    2. Detach the 2 claws and 2 guides, and remove the deck rail cover.

  8. Click here

    REMOVE LOWER DECK TRIM SIDE BOARD LH (w/o Rear No. 2 Seat)


    1. Detach the claw and 2 guides, and remove the lower deck trim side board.

  9. Click here

    REMOVE LOWER DECK TRIM SIDE BOARD RH (w/o Rear No. 2 Seat)

    Tip:

    Use the same procedure described for the LH side.

  10. Click here

    REMOVE DECK FLOOR BOX LH


    1. w/o Rear No. 2 Seat:


      1. Detach the 4 claws and remove the deck floor box.

    2. A01IN2Q

      w/ Rear No. 2 Seat:


      1. Remove the bolt.

      2. Detach the 3 claws and guide, and remove the deck floor box.

  11. Click here

    REMOVE DECK FLOOR BOX RH


    1. w/o Rear No. 2 Seat:


      1. Detach the 2 claws and guide, and remove the deck floor box.

    2. A01IPFF

      w/ Rear No. 2 Seat:


      1. Remove the bolt.

      2. Detach the 2 claws and guide, and remove the deck floor box.

  12. Click here

    REMOVE DECK TRIM SIDE BELT HOLE COVER LH (w/ Rear No. 2 Seat)


    1. Detach the 2 claws and 6 guides, and remove the deck trim side belt hole cover in the direction indicated by the arrow in the illustration.

  13. Click here

    REMOVE DECK TRIM SIDE BELT HOLE COVER RH (w/ Rear No. 2 Seat)

    Tip:

    Use the same procedure described for the LH side.

  14. Click here

    REMOVE REAR NO. 2 SEAT TRACK BRACKET COVER (w/ Rear No. 2 Seat)

    Tip:

    Use the same procedure to remove the cover on the other side.


    1. A01IS71

      Detach the 2 claws and remove the cover.

  15. Click here

    REMOVE REAR NO. 2 SEAT TRACK COVER (w/ Rear No. 2 Seat)


    1. A01IPIR

      Detach the 3 claws and 2 guides, and then remove the cover.

  16. Click here

    REMOVE REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)


    1. Disconnect the connector under the seat.

    2. A01IRCI

      Remove the 5 bolts.

    3. A01ITYW

      Pull the 2 straps and fold down the 2 seatbacks.

    4. Remove the 2 bolts.

    5. Remove the rear No. 2 seat assembly from the vehicle.

      Note:

      Be careful not to damage the vehicle body.

  17. Click here

    REMOVE REAR DECK FLOOR BOX (w/o Rear No. 2 Seat)


    1. A01IO7TE01

      Remove the rear deck floor box.

  18. Click here

    REMOVE REAR DECK TRIM COVER


    1. Detach the 6 claws and 4 guides, and remove the rear deck trim cover.

  19. Click here

    REMOVE REAR DOOR SCUFF PLATE LH


    1. Detach the 9 claws and 2 clips, and remove the rear door scuff plate.

  20. Click here

    REMOVE REAR DOOR SCUFF PANEL LH


    1. Detach the 5 claws and guide, and remove the rear door scuff panel.

  21. Click here

    REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH


    1. Remove the rear door opening trim weatherstrip.

  22. Click here

    REMOVE FRONT DECK SIDE TRIM COVER LH


    1. Using a screwdriver, detach the 2 claws and remove the front deck side trim cover.

      Tip:

      Tape the screwdriver tip before use.

      Table 1. Text in Illustration
      *1 Protective Tape
  23. Click here

    REMOVE DECK TRIM SIDE SERVICE HOLE COVER

    Tip:

    Use the same procedure to remove the deck trim side service hole cover on the other side.


    1. Using a screwdriver, detach the 4 claws and 2 guides, and remove the deck trim side service hole cover.

      Tip:

      Tape the screwdriver tip before use.

      Table 2. Text in Illustration
      *1 Protective Tape
  24. Click here

    REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Tip:

    Use the same procedure for all the luggage hold belt strikers.


    1. Remove the bolt and luggage hold belt striker.

  25. Click here

    REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH


    1. w/ Rear No. 1 Seat:

      Remove the bolt and rear No. 1 seat belt anchor.

    2. A01IRRR

      w/ Rear No. 2 Seat:

      Remove the bolt and rear No. 2 seat belt anchor

    3. Remove the 2 bolts.

    4. Detach the 6 clips and 7 claws.

    5. A01ISVL

      Disconnect the connector and remove the deck trim side panel.

  26. Click here

    REMOVE FRONT DOOR SCUFF PLATE LH


    1. Detach the 8 claws and 2 clips, and remove the front door scuff plate.

  27. Click here

    REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY


    1. A01IQT9

      Remove the screw.

    2. Move the fuel lid lock open lever in the direction indicated by the arrow in the illustration to detach the claw and remove the lever.

    3. Disconnect the fuel lid lock control cable.

    4. Detach the grommet.

  28. Click here

    REMOVE FRONT FLOOR FRONT CARPET ASSEMBLY


    1. A01IS8YE01

      Detach the 3 clamps and fold back the floor front carpet from the floor carpet hooks.

      Table 3. Text in Illustration
      *1 Floor Carpet Hook
      *2 Front Floor Front Carpet
  29. Click here

    REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY


    1. A01IN9K

      Detach the 2 claws and remove the fuel lid lock control cable from the fuel filler opening lid lock retainer.

    2. A01IS67E01

      Detach the clamps and remove the fuel lid lock control cable.

      Table 4. Text in Illustration
      *1 Fuel Lid Lock Control Cable *2 Wire Harness
  30. Click here

    REMOVE FUEL FILLER OPENING LID LOCK RETAINER


    1. A01INGQ

      Remove the fuel filler opening lid lock retainer by rotating it as shown in the illustration.