OUTER REAR VIEW MIRROR GLASS INSPECTION


  1. INSPECT MIRROR SUB-ASSEMBLY LH

    A01IQVDE01

    1. Check the outer mirror heater operation.


      1. Measure the resistance according the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 25°C (77°F) 13.4 Ω

        If the result is not as specified, replace the mirror sub-assembly LH.

  2. INSPECT MIRROR SUB-ASSEMBLY RH

    A01IOJUE01

    1. Check the outer mirror heater operation.


      1. Measure the resistance according the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 25°C (77°F) 13.4 Ω

        If the result is not as specified, replace the mirror sub-assembly RH.