Click here

OUTER REAR VIEW MIRROR GLASS REMOVAL

Click here
Click here Click here
Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

Click here
  1. Click here

    REMOVE MIRROR SUB-ASSEMBLY LH


    1. Put protective tape around the mirror sub-assembly LH.

      Table 1. Text in Illustration
      *1 Moulding Remover
      *2 Protective Tape

    2. Using a moulding remover, detach the 8 claws at the mirror sub-assembly LH as shown in the illustration.

    3. A01IS0A

      Disconnect the 2 connectors and remove the mirror sub-assembly LH.