BACK DOOR OUTSIDE GARNISH REASSEMBLY

Tech Tips

When installing the back door outside garnish pad, back door outside garnish protector and back door garnish side protector, heat the back door outside garnish surface using a heat light.

Standard
Item Temperature
Back Door Outside Garnish 40 to 60°C (104 to 140°F)

Note

Do not heat the back door outside garnish sub-assembly excessively.


  1. INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR

    A01IRRX

    Tech Tips

    Use the same procedure for the other back door outside garnish protector.


    1. Clean the back door outside garnish sub-assembly surface.


      1. Using a heat light, heat the back door outside garnish sub-assembly surface.

      2. Remove the double-sided tape from the back door outside garnish sub-assembly surface.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new back door outside garnish protector.

  2. INSTALL BACK DOOR GARNISH SIDE PROTECTOR LH

    A01ITSV

    1. Clean the back door outside garnish sub-assembly surface.


      1. Using a heat light, heat the back door outside garnish sub-assembly surface.

      2. Remove the double-sided tape from the back door outside garnish sub-assembly surface.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new back door garnish side protector.

  3. INSTALL BACK DOOR GARNISH SIDE PROTECTOR RH

    Tech Tips

    Use the same procedure described for the LH side.

  4. INSTALL BACK DOOR OUTSIDE GARNISH PAD

    A01IO3U

    1. Clean the back door outside garnish sub-assembly surface.


      1. Using a heat light, heat the back door outside garnish sub-assembly surface.

      2. Remove the double-sided tape from the back door outside garnish sub-assembly surface.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new back door outside garnish pad.

  5. INSTALL SYMBOL EMBLEM

    A01IS3QE02
    Text in Illustration
    *1 Protective Tape
    *2 Boss

    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new symbol emblem.


      1. Using a heat light, heat the vehicle body and a new symbol emblem.

      2. Remove the peeling paper from the face of the symbol emblem.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Align the boss positions and install the symbol emblem.

        Tech Tips

        Press the symbol emblem firmly to install it.

  6. INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)


    1. A01ISVC

      Attach the 4 claws to install the rear television camera.