Click here

ROCKER PANEL MOULDING INSTALLATION

Click here
Click here Click here
Tip:

  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart (Click here).

Click here
  1. Click here

    INSTALL ROCKER PANEL MOULDING LH


    1. Attach the 8 clips to install the rocker panel moulding.

    2. A01IS3J

      Install the 2 screws.

    3. A01IQ60

      Install the 7 grommets.

  2. Click here

    INSTALL REAR WHEEL HOUSE FRONT PLATE LH


    1. Attach the claw to install the rear wheel house front plate.

    2. Attach the clip and install the 2 screws.

  3. Click here

    INSTALL FRONT SIDE MUDGUARD LH


    1. Install the front side mudguard with the 2 screws.