Click here

VEHICLE STABILITY CONTROL SYSTEM PROBLEM SYMPTOMS TABLE

Click here
Click here Click here
Tip:
  • Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

  • Inspect the fuses and relays related to this system before inspecting the suspected areas below.

Note:

When replacing the brake actuator assembly, sensor, etc., turn the ignition switch off.

Table 1. Vehicle Stability Control System
Symptom Suspected Area See page
ABS, BA and/or EBD does not operate Check for DTCs again and make sure that the normal system code is output.

Click here

IG power source circuit

Click here

Front speed sensor circuit

Click here

Rear speed sensor circuit

Click here

Check the brake actuator assembly using the intelligent tester (check brake actuator assembly operation using the Active Test function). If abnormal, check the hydraulic circuit for leakage.

Click here

If the symptoms still occur even after the above circuits in suspected areas are inspected and prove to be normal, replace the skid control ECU (brake actuator assembly).

Click here

ABS, BA and/or EBD does not operate normally Check for DTCs again and make sure that the normal system code is output.

Click here

Front speed sensor circuit

Click here

Rear speed sensor circuit

Click here

Stop light switch circuit

Click here

Check the brake actuator assembly using the intelligent tester (check brake actuator assembly operation using the Active Test function). If abnormal, check the hydraulic circuit for leakage.

Click here

If the symptoms still occur even after the above circuits in suspected areas are inspected and prove to be normal, replace the skid control ECU (brake actuator assembly).

Click here

ABS sensor DTC check cannot be performed Check for DTCs again and make sure that the normal system code is output.

Click here

TC and CG terminal circuit

Click here

If the symptoms still occur even after the above circuits in suspected areas are inspected and prove to be normal, replace the skid control ECU (brake actuator assembly).

Click here

ABS warning light abnormal (Remains on) ABS warning light circuit

Click here

Skid control ECU

Click here

ABS warning light abnormal (Does not come on) ABS warning light circuit

Click here

Skid control ECU

Click here

Brake warning light abnormal (Remains on) Brake warning light circuit

Click here

Skid control ECU

Click here

Brake warning light abnormal (Does not come on) Brake warning light circuit

Click here

Skid control ECU

Click here

VSC and/or TRC does not operate Check for DTCs again and make sure that the normal system code is output.

Click here

IG power source circuit

Click here

Check the hydraulic circuit for leakage. -
Front speed sensor circuit

Click here

Rear speed sensor circuit

Click here

Yaw rate sensor circuit

Click here

Steering angle sensor circuit

Click here

If the symptoms still occur even after the above circuits in suspected areas are inspected and prove to be normal, replace the skid control ECU (brake actuator assembly).

Click here

VSC sensor DTC check cannot be performed Check for DTCs again and make sure that the normal system code is output.

Click here

TC and CG terminal circuit

Click here

If the symptoms still occur even after the above circuits in suspected areas are inspected and prove to be normal, replace the skid control ECU (brake actuator assembly).

Click here

Master warning light and/or multi-information display abnormal (Remains on) VSC warning (Master warning light and multi-information display) circuit

Click here

Skid control ECU

Click here

Master warning light and/or multi-information display abnormal (Does not come on) VSC warning (Master warning light and multi-information display) circuit

Click here

Skid control ECU

Click here

VSC OFF indicator (multi-information display) abnormal (Remains on) VSC OFF indicator (multi-information display) circuit

Click here

Skid control ECU

Click here

VSC OFF indicator (multi-information display) abnormal (Does not come on) VSC OFF indicator (multi-information display) circuit

Click here

Skid control ECU

Click here

Slip indicator light abnormal (Remains on) Slip indicator light circuit

Click here

Skid control ECU

Click here

Slip indicator light abnormal (Does not come on) Slip indicator light circuit

Click here

Skid control ECU

Click here

Sensor check cannot be performed TS and CG terminal circuit

Click here

Skid control ECU

Click here

Skid control buzzer abnormal Skid control buzzer circuit

Click here

Skid control ECU

Click here